RS485 IO Extender Card
Model: TSETD1000
Name: RS485 IO Extender Card
Our smart Modbus IO Extension Card can extend more IOs with digital, analog, and relay options. This device can collect data from various Modbus slaves, sensors, and industrial machines. This collected data can be sent to the centralized server or cloud server. The gateway supports multiple protocols like TCP / HTTP / MQTT with SSL mode. We can configure it using PC utility, SMS, or server IP commands. All parameters of this device are remotely configurable. The plug-and-play system in the RS485 IO Extender Card assists in reducing the prototype development life cycle and provides developers and solution integrators. Our product consists of easy Plug and Play on analog and digital Sensors (0 to 24V), (4 to 20mA), digital IN, pulse counter, and relay out – industrial low-cost hardware.
This device simplifies the process of connecting one or many standard Modbus slaves and configuring Modbus and Modbus registration. The transition of wired network to wireless communication with the various connecting options, such as GPRS/2G/3G/4G/LTE/ Wifi/ LAN/ NB-IoT based Modbus gateway with Logger options, provides a simple and more cost-effective solution.
- Intelligent Modbus, IO, Data Logger, 2G,4G GPRS/WiFi/Lora Connectivity
- 1 x RS-485 port for RTU Modbus Isolated Embedded ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog
- Wide range power supply 9~36VDC with over voltage and phase-reversal protection
- 4 CH AI, 3 DO
- Configure and Read Multiple Slave IDs Upto 30, Selectable Register Address data upto 30
- Parameter Data type, Byte Swapping Conversion and Scaling factor enabled
- Transparent Modbus or Device Inbuilt Polling – Formatted to (ASCII/HEX/RawHEX)
Smart Inbuilt Data Logger works during Network and Server Disconnection - Logger Sends offline data once Network and Server Connected
- Upto 6 Authorized numbers list for command and Configuring
- Configurable TCP/Http/MQTT/Https Mode, GET/POST Methods
- Configurable CSV/JSON Format for Parameter Packetization
- Remote Configuration through SMS/GPRS/Server IP Commands
- Alerts: Power Failure Restore, Low battery Shutdown, Digital IN Changes, Device Reset
- OTA (Over The Air) Firmware upgrade, Device Configuration update
- LED & LCD indicators to provide GSM, GPRS, Signal, Modbus Tx/Rx COM Status
- Configurable Server Connection: Connects on Demand or Always Connected
- Keep Alive command to maintain socket connection
- LCD Display for Indications and LED Indications
- DG Set Monitoring
- CCMS
- Cold Storage
- Smart City
- Energy Management
- Pump Management